RENTARC LIMITED
KEEPING WELDERS WELDING
Welding Equipment Hire
Hire Wizard - Coming Soon
Recently Viewed
Positioner Model RP10TS Series is a 10 metric tonne capacity designed to give a maximum positioning benefit by using tilt and rotation of the table for easy positioning of the workpiece. Two robust columns permits the operator to adjust the vertical height manually in increments of 150 mm per slot/pitch to give a minimum table height of 1350mm up to maximum table height of 1950mm. The table is machined with four radial slots for anchor bolts and centric marking on the table and is powered driven by AC motor controlled by the latest inverter control box fitted with remote pendant control to provide stop/start, forward/reverse, tilt and variable speed control. Tilt movement is electrically power driven by 4.0Kw AC motor with Dynamic Braking through the reduction gearbox. Earth connections are made through a rotary earth clamp to ensure good earthing to the welding power source.
Model: RP10TS- FA-D1800 Table Size: Diameter of 1800mm Pendant Control: 24VAC circuit, push button with 6metre cable Input voltage: 400V/3phase/16amps/50Hz (Specify voltage requirement when ordering) Turning Capacity: 10-metric ton at 300mm (refer load chart) Rotation Speed: 0.08 to 0.8rpm Tilting Capacity: 10-metric ton at 300mm (refer load chart) Tilt Range: 0 to 135 Degrees Tilt Speed: 135 Degree at 110second Rotation Drive Motor: 4.0 Kw motor Rotation Drive Control: 4.0 Kw AC inverter Tilt Drive Motor: 4.0 Kw c/w brake
Picture shown is representative only. Appearance of actual item may differ.